11). Passengers floor II

With the floor pan in place, I taped it off with some masking paper and cleaned the steel with a wax and grease remover.

Next I applied an etching product that contained zinc to protect the steel from future rust and prepare the surface for epoxy primer.

I had also bought some brushable seam sealer that claimed it could be applied directly to metal, you just needed to tape off the area then slop it on over your seams.

This looked horrible in my opinion…

And even worse once the epoxy primer was applied.

And although I finished off this side with the brushable seam sealer, I chose a completely different product that was applied with a caulk gun after the epoxy primer had been applied and I feel it worked much better than this stuff.

To find a particular page, use the search feature or index page.